1
Pen Type Multimeter
Model: MP730001
IMPORTANT SAFETY INFORMATION
SYMBOL GUIDE
WHAT’S INCLUDED
FUNCTIONS
Please read these instructions carefully before use and
retain for future reference.
• This instrument is designed and manufactured in compliance
with: lEC61010-1, CAT III 300V Pollution Degree 2 and
Double Insulation standards.
• Check the test leads, probes and case insulation before
using. If you find any breakage or abnormality, or you
consider the device is broken, stop using the device
immediately.
• When using the test probes, keep your fingers behind the
finger protection ring.
• Replace damaged test leads with identical type and
electrical specifications before using the Meter.
• Do not use or store the Meter in an environment of high
temperature, humidity, explosives, flammable materials and
strong magnetic fields.
• Do not use the meter with the back cover open.
• Select appropriate test range for measurements.
• Ensure all inputs are less than the range selected otherwise
it may cause electrical shock or meter damage.
• Do not change the range selector position during voltage
measurements.
• Disconnect circuit power and discharge all high voltage
capacitors before testing resistance, diodes or continuity.
• Do not apply a voltage over 300V between input terminal
and ground.
• Take caution when working voltages are above 60V DC or
30V AC rms.
• Do not connect the meter to voltage signals when the range
selector is on resistance, diode or continuity range.
• When a measurement has been completed, disconnect the
testing probes from the circuit under test.
• Replace the batteries as soon as the low battery indicator
appears on the display.
• Remove dead batteries from the meter or if it is not going to
be used for a long time.
• Never mix old and new batteries together, or different types
of batteries.
• Never dispose of batteries in a fire, or attempt to recharge
ordinary batteries.
• Before replacing the battery, turn off the meter and
disconnect all the test probes.
• To prolong battery life turn off the meter after use.
Low Battery
Ground
AC Current
DC Current
Double Insulated
Continuity
AC or DC
Diode
• Digital pen meter with battery
• 1 pair of test leads
• Operating instructions
9. Minimum reading
10. Maximum reading
11. Capacitance
12. Diode test
13. Continuity buzzer
14. mv/V: Volts
15. Ohm.(resistance) k:kilohm; M:Megaohm.
