69
www.
multilaser
.
com.br
Atmospheric pressure
86 kPa ~ 106 kPa
Language
Spanish, Portuguese, English,etc.
10.0 Troubleshooting
If your GPS navigator fails to work, please check it following the solutions below. If the problem still
exists, please contact our customer service center.
Failures
Causes
Solutions
The device does not turn on
The battery energy is
insufficient
Power the system with external power source and charge the battery at
the same time
The batter switch is off
Switch upward the battery switch
The device turns off
during use
The battery energy is
insufficient
Power the system with external power source and charge the battery at
the same time
The device fails to display;
The display contents are
not clear
The back light brightness
is too low, The back light is
turned off automatically
Adjust the brightness using the touch pen to click the LCD screen. The
back light will be on again
No right actions occur on
clicking the button
The touch screen is not
calibrated.
Calibrate the touch screen again
There is no sound while
playing
The volume is set too low
Increase the volume
The earphone is in poor
contact
Plug the earphone properly
The device cannot access a
computer
The USB cable fails to
connect
Connect the USB cable properly
The device cannot receive
the GPS signals
-
It depends on whether local GPS satellite signals are strong or weak. Wait
for three minutes above to receive signals
The map data is missing
inadvertently
-
1. There are map files stored in the disk.
2. Contact your agent or dealer to ask for a password that is required
when the navigation function is activated again.
Summary of Contents for GP011
Page 102: ...www multilaser com br ...