31
The user can select from any of the six
Action Types
in the dropdown list. Each action is described by its name, and
when selected, will turn on, turn off, or reset an outlet or relay. When selecting an action, note that the action selected
will either apply to an outlet or to a relay, not to both. When choosing to reset an outlet or relay, the user will be
prompted to select the reset time.
The user will then select the
Output Number
for the outlet or the relay for which the action will take place. The user
may select a single outlet or relay or may select “All”, which will affect all outlets or all relays. When “All” is select-
ed, the action will display as “0” in the Outlet Actions or Input Actions fields to indicate all outlets or relays have
been selected.
After selecting the output number, the user can define a delay for the action to take place. The delay is entered in se-
conds from 0 to 3600, allowing for a delay of up to 1 hour before the action takes place. An entry of “0” would indi-
cate an immediate action, where “5” would indicate a 5 second delay.
