Visit
for new product releases!
INST
ALL
ATION
Cop
yrigh
t © 2019 Multilink I
nc
. A
ll righ
ts r
eser
ved • Sp
ecific
ations subjec
t t
o change without notic
e • Re
v. 11/20/2019 •
Page 14
Do
cu
men
t N
o.
O
pti
ma
16
Ins
tal
la
tio
n G
ui
de
4.32 Install Optidrop Fiber Connector
Remove the adapter cover from the
bulkhead. Then remove the dust cap from the
connector and insert into the adapter following the
standard fiber color chart. DO NOT remove all the
adapters cover at once. Multilink is not responsible
for any fiber loss that may occur if this is performed
improperly. Repeat for the number of appropriate
customer drops, if some drops are inactive then the
connections need to be inserted into the supplied
foam parking lot.
4.33 Latch Cover to Optima Shell
Once the sealant has been applied to the
gel then close the Optima 16 cover using the
plastic latch located on the side of the closure.
When closing the door ensure that the Optidrops
follow the grooves of the cover and the latche
clicks into place to allow for the necessary
compression. Secure each fiber drop to strain relief
bracket using the supplied zip ties to prevent the
fiber from moving and creating an opening in the
gel.
Installation (Cont.)
4.31 Install Optidrop(s)
Open the door on the front of the Optima
16 and place each Optidrop in each available
groove (up to 12). Secure each into the gel front
wall then click into that grooves clip. Ensure to
hear a click from the clip to confirm the Optidrop is
secured.
Optima 16 Distribution Installation
