background image

 

 

product), (l) any  software (irrespective of packaged or sold with an MultiQ hardware 
product) (m) Products purchased  from an unauthorized distributor/reseller, (n) damage 
that occurs in shipment or (o) damages by any  other causes not related to defective 
design, workmanship and/or materials. 

NOTES:

  If the product is to be used outdoors or in dusty, humid, or other hostile 

environments, it must be suitably protected. 

MultiQ apply the ISO standard for panels, ISO 13406-2 class ll. 

Products with touch glass, of all types, need to be cleaned with none aggressive liquid, 
and the touch surface should not by any circumstances be exposed of higher hardness 
level (according to Mohs  scale), than as stipulated in the touch-glass manufactures 
specification. Wear caused by sharp objects similar but not limited to sharp pens, edge 
of credit cards and fingernails is not covered by warranty. 

Additional hardware embedded in MultiQ’s Products, such as Touch functions, Card 
readers and similar features present today and available in the future are often used with 
driver software not developed by MultiQ. If other drivers than those approved by MultiQ 
as per the purchase date are used in or together with the Products, this will render the 
warranty invalid for the Product, unless MultiQ has  approved in writing the drivers for 
use together with the Product.  

Failure to comply with any of the aforementioned requirements will invalidate this 
Limited Hardware Warranty. 

THE WARRANTY AND REMEDIES PROVIDED ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL 
OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE 
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 
CERTAIN JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF 
LAWS UNDER SUCH JURISDICTIONS APPLY, THEN ALL EXPRESS AND IMPLIED 
WARRANTIES ARE LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS 
PROVIDED HEREIN, ANY STATEMENTS OR REPRESENTATIONS MADE BY ANY OTHER 
PERSON OR FIRM OTHER THAN MULTIQ ARE VOID. 

EXCEPT AS PROVIDED IN THIS WRITTEN WARRANTY AND TO THE EXTENT PERMITTED BY 
LAW, NEITHER MULTIQ NOR ANY AFFILIATES SHALL BE LIABLE FOR ANY LOSS, 
(INCLUDING LOSS OF DATA AND INFORMATION), INCONVENIENCE, OR DAMAGE, 
INCLUDING, BUT NOT LIMITED TO, DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL 
DAMAGES, RESULTING FROM THE USE OR INABILITY TO USE THE MULTIQ PRODUCT, 
WHETHER RESULTING FROM BREACH OF WARRANTY OR ANY OTHER LEGAL THEORY. 

NOTWITHSTANDING THE FOREGOING, MULTIQ’s TOTAL LIABILITY FOR ALL CLAIMS 
UNDER THIS WARRANTY SHALL NOT EXCEED THE PRICE PAID FOR THE PRODUCT. 
THESE LIMITATIONS ON POTENTIAL LIABILITIES HAVE BEEN AN ESSENTIAL CONDITION IN 
SETTING THE PRODUCT PRICE. 

Applicable Law 

This Limited Warranty is governed by and construed under the laws of Sweden. 

This Limited Hardware Warranty may be subject to MultiQ’s change at any time without 
prior notice. 

Summary of Contents for Media Monitor 4
































Reviews: