PAGE 40 — DCA85USJ2 60 HZ GENERATOR • OPERATION AND PARTS MANUAL — REV. #1 (03/22/11)
OUTPUT TERMINAL PANEL FAMILIARIZATION
Connecting Loads
Loads can be connected to the generator by the
Output
Terminal Lugs
or the convenience receptacles (Figure 12).
Make sure to read the operation manual before attempting
to connect a load to the generator.
To protect the output terminals from overload, a 3-pole,
175A
main
circuit breaker is provided. Make sure to switch
ALL
circuit breakers to the
OFF
position prior to starting
the engine.
Figure 12. Connecting Loads
Over Current Relay
An
over current relay
(Figure 13) is connected to the main
circuit breaker. In the event of an overload, both the circuit
breaker and the over current relay may trip. If the circuit
breaker can not be reset, the
reset button
on the over
current relay must be pressed. The over current relay is
located in the control box.
Figure 13. Over Current Relay
Summary of Contents for DCA85USJ2
