PAGE 20 — GAW-135H DC WELDER/AC GENERATOR — OPERATION MANUAL — REV. #0 (06/23/04)
GAW-135H — WELDER/GENERATOR REFUELING
Figure 3. Generator/Welder Refueling
Adding fuel to the tank should be done only when
the engine is stopped and has had an opportunity
to cool down. In the event of a fuel spill,
DO NOT
attempt to start the engine until the fuel residue
has been completely wiped up, and the area surrounding the
engine is dry. If generator is placed in a truck bed with a plastic
liner,
REMOVE
generator from truck bed and place on ground
(Figure 3) to refuel. This possibility exist of
fire
or
explosion
due
to static electricity.
DANGER
DANGER
DANGER
DANGER
DANGER
