PAGE 14 — JTNSW20-24HTCSL SERIES RIDE-ON TROWEL • OPERATION MANUAL — REV. #1 (3/24/16)
SPECIFICATIONS/DIMENSIONS
Table 2. JTNSW20HTCSL-JTNSWSW24HTCSL Noise and Vibration Emissions
Model
JTNSW20HTCSL
JTNSW24HTCSL
Guaranteed ISO 11201:2010 Based
Sound Pressure Level at Operator Station in dB(A)
90.84
XX.XX
Guaranteed ISO 3744:2010 Based
Sound Power Level in dB(A)
115.66
XXX.XX
Whole Body Vibration Per ISO 2631-1:1997+A1:2010 in m/s
2
S
A(8)
0.06
X.XX
Table 3. Engine Specifications/Dimensions
Model
Honda GX630 RQ QZB2-R280 Engine
Honda GX690RQZB2-R280
Type
4 Stroke, Overhead Valve, 90° V-Twin
2 cylinder gasoline engine.
4 Stroke, Overhead Valve, 90° V-Twin
2 cylinder gasoline engine
Bore x Stroke
78 x 72 mm (3.1 x 2.8)
78 x 72 mm (3.1 x 2.8)
Piston Displacement
688 cc (41.9 cu.in).
688 cc (41.9 cu.in).
Net Power Output
15.5 kW (20.8 HP/3,600 rpm)
16.5 kW (22.1 HP/3,600 rpm)
Max. Torque
48.3 N.m (4.93 kgf.m 35.6 lbf.ft)
@ 2,500 rpm
48.3 N.m (4.93 kgf.m 35.6 lbf.ft)
@ 2,500 rpm
Cooling System
Forced Air
Forced Air
Engine Oil Capacity
SAE 10W-30 API Service
Class SE or later
1.6 qt. (1.50 liters)
1.8 qt. (1.7 liters w/oil filter replacement)
1.6 qt. (1.50 liters)
1.8 qt. (1.7 liters w/oil filter replacement)
Fuel
Unleaded gasoline
Octane rating of 86 or higher.
Maximum 10% ethanol.
See engine manual for further details.
Unleaded gasoline
Octane rating of 86 or higher.
Maximum 10% ethanol.
See engine manual for further details.
Fuel Consumption
6 liters/hr.@ 3600 RPM
6 liters/hr.@ 3600 RPM
Starting System
Electric Start/CDI Type Magneto Ignition
Electric Start/CDI Type Magneto Ignition
Spark Plug Type
ZFR5F NGK
ZFR5F NGK
Spark Plug Gap
0.70 - 0.80 mm (0.028-0.031 in.)
0.70 - 0.80 mm (0.028-0.031 in.)
L x W x H
405 x 410 x 438 mm (15.9 x 16.1 x 17.2 in.) 429 x 450 x 438 mm (16.9 x 17.7 x 17.2 in.)
Weight (dry)
44.4 kg (97.8 lbs.)
45.3 kg (99.9 lbs)
NOTES:
1. Sound Pressure and Power Levels are “A” weighted Measures per ISO 11201:2010 and ISO 3744:2010 respectively, and adjusted for uncertainty
per EN 12649:2008+A1:2011. They are measured with the operating condition of the machine which generates the highest values of the sound
levels. Under normal circumstances, the sound level will vary depending on the condition of the material being worked upon.
2. The vibration level indicated is the vector sum of the RMS (Root Mean Square) Values of amplitudes on each axis, standardized to an 8 hour
exposure period, and obtained using operating condition of the machine that generates the highest values in accordance with the applicable
standards for the machine.
3. Per EU Directive 2002/44/EC, the daily exposure action value for whole body vibration is 0.5 m/s
2
S
A(8). The daily exposure limit value is
1.15 m/s
2
S
A(8).
