PAGE 17 — JTNSW20-24HTCSL SERIES RIDE-ON TROWEL • OPERATION MANUAL — REV. #1 (3/24/16)
13.
Lift Loops
— Located on both sides of the main frame.
Used to lift the trowel.
14.
Engine Stop Switch
— Located within the seat is the
an engine start/stop switch. Operator must be sitting in
the seat for the to start engine. Conversely if operator
exits seat, engine will stop.
15.
Rear Light
— 12 volt halogen lights, used for night
operations.
16.
Battery
— Pr12V DC power to the electrical
system.
17.
Retardant Spray Pump
— Delivers retardant to the
spray nozzle.
18.
Engine
— Air cooled 4-stroke overhead valve 2
cylinder Honda GX630, 20 HP,
or
, GX690, 24 HP
gasoline engine.
19.
Right-Side Spider
— Consists of trowel arms, blades,
wear plate, and thrust collar.
20.
EZ-Mover Boss
— Rear attachment point for EZ
Mover. Used to transport the trowel.
21.
Retardant Spray Tank
— Holds 5 gallons of retardant.
22.
Left-Side Spider
— Consists of trowel arms, blades,
wear plate, and thrust collar.
23.
Fuel Tank
— Holds 5 gallons of unleaded gasoline.
24.
Fuel Filler Cap
— Remove this cap to add unleaded
gasoline to the fuel tank. Make sure cap is tightened
securely.
DO NOT
overfill.
25.
Belt Guard
— Encloses drive belt used in conjunction
with clutch.
COMPONENTS
Figure 3. Components – Rear
13
13
15
23
21
22
19
16
20
20
14
17
24
18
25
RETARDANT ONLY
