SG1400/1600C4F STUDIO GENERATOR • OPERATION MANUAL — REV. #0 (07/22/20) — PAGE 27
DIGITAL CONTROLLER
Refer to Figure 10 for location of controls and indicators.
1.
STATUS LED
— Indicates status of the controller.
Lights green when the controller is running.
NAVIGATIONS BUTTONS
2.
ARROW UP Button
— Press button to scroll up
through the status menus or programming prompts.
3.
ARROW DOWN Button
— Press button to scroll down
through the status menus or programming prompts.
4.
MENU Button
— Press button to jump to menu/sub-
menu page or escape from any dialog window.
5.
ENTER Button
— Press button to confirm a value or
open a value adjustment within setting dialogs.
CONTEXT BUTTONS
6.
MODE Button
— Press button to jump to the controller
mode window.
7.
HISTORY Button
— Press button to jump to history
screen.
8.
ALARM Button
— Press button to jump to alarm list
9.
GCB (Generator Circuit Breaker) CONTROL
Button
— Press button to close/open GCB.
10.
MCB CONTROL Button
— Not functional in this
application.
CONTROL BUTTONS
11.
START Button
— Press button to go idle mode (about
an hour) then generator starts. A second press will
bypass idle mode and generator goes to full speed
immediately.
12.
STOP Button
— Press button to cool the generator
for about 5 minutes then the generator will stop. A
second press will bypass cool down and will stop the
generator immediately.
13.
FAULT RESET Button
— Press button to acknowledge
faults and alarms (active only in Alarm screen).
14.
HORN RESET Button
— Press button to deactivate
the horn (audible alarm).
15.
DISPLAY
— Shows menu, measurements, set points,
alarm list, history, and help/other screens.
NOTICE
START
and
STOP
buttons work in MAN (manual) or
SEM (semi-manual) mode only.
NOTICE
For more detailed operating and programming
information on the digital controller, refer to the
InteliVision 5™ Controller User's Guide.
Figure 10. Digital Controller
2
4
5
1
3
6
7
8
9
10
12
13
14
11
15
