PRO SERIES WALK-BEHIND TROWELS • OPERATION MANUAL — REV. #0 (9/21/17) — PAGE 17
FRESNO BLADE
The fresno blade follows the path of the four combination
blades and provides a smooth finish over large areas
without the user having to walk out on the troweling surface.
This trowel comes equipped with a single fresno screed
blade (5 in./127 mm wide, 48 in./1,219 mm long) that is
raised and lowered via a winch crank handle.
FRESNO BRUSH
The fresno brush follows the path of the fresno blade and
four combination blades to provide a textured, decorative
finish to the troweling surface. The fresno brush is designed
to follow the path of the fresno blade in a floating, or loose,
configuration. The floating configuration allows trowel
operators to independently match the fresno brush to their
troweling preference without the need to manually pitch the
brush on each pass.
MECHANICAL BOOM
The mechanical boom is mounted in front of the trowel
unit and supports the fresno brush, fresno blade, and
optional plated weights. The boom raises and lowers the
brush and blade via the hand crank winch, and can rotate
180° laterally, which is adjustable based on the operator's
preference and troweling surface.
TRAINING
For proper training, please use the
Training Checklist
form located in the front of this manual. This checklist will
provide an outline for an experienced operator to provide
training to a new operator.
GENERAL INFORMATION
