TB12SE/TB12PE TUFFTRUK POWER BUGGY• OPERATION MANUAL — REV. #0 (04/01/22) — PAGE 9
NOISE AND VIBRATION
NOTES:
1.
Sound pressure and power levels are “A” weighted measures per ISO 3744:2010. They are measured with the operating condition of the
machine which generates the most repeatable but highest values of the sound levels. Under normal circumstances, the sound level will vary
depending on the condition of the material being worked upon.
2.
The vibration level indicated is the vector sum of the RMS (root mean Ssquare) values of amplitudes on each axis, standardized to an 8-hour
exposure period, and obtained using the operating condition of the machine that generates the most repeatable but highest values in accordance
with the applicable standards for the machine.
3.
Per EU Directive 2002/44/EC, the daily exposure action value for hand/arm vibration is 2.5 m/s
2
∑
A(8). The daily exposure limit value
is 5 m/s
2
∑
A(8).
Table 3. Noise and Vibration Emissions
Model
TB12SE/TB12PE
Guaranteed ISO 11201:2010 Based Sound Pressure Level
at Operator Station in dB(A)
a
56
Guaranteed ISO 3744:2010 Based Sound Power Level in dB(A)
b
76
Hand-Arm Vibration Per ISO 5349-1:2001 in m/s
2
∑
A(8)
2.5
a. With an uncertainty factor K of 2.5 dB (A) included per Note 1 in section 7.2.1 of EN 12649::2008+A1:2011
b. With an uncertainty factor K of 1.5 dB (A) included per Note 1 in section 7.2.1 of EN 12649::2008+A1:2011
