MultiScree
∂
Channel
Display Time
The time in seconds each new screen will be displayed for.
Background Colour
The background colour of each newly created screen, as well
as the colour of the end marker screen of a sequence.
Transition
The transition that is applied to all new screens created.
Fit Screen
Whether new graphics should be stretched to fit the screen.
Text Alignment
The alignment of text added to a new screen.
Volume
The volume of sounds added to a new screen.
Clock Defaults
Click the Clock Defaults button to alter the appearance of
new clocks added to screens. The procedure for setting these
defaults is similar to that of adding a clock to a screen (see
page 52
). First, set the defaults for any analogue clocks you
create. Then, click the digital clock check button and set the
defaults for new digital clocks. Finally, decide whether you
want new clocks to be analogue or digital by default, and
click the appropriate check button.
Scroller Defaults
Click the Scroller Defaults button to alter the appearance of
new scrollers added to screens. Here the Transition type,
Repeat Times, Colour, Speed, etc. can be set. The process is
the same as for setting up a new scroller, see
Adding a
for details. Note that there is
no default text for a scroller - a new scroller will always be
created blank, so that new text may be entered. The letters
AaBbCc are shown only to preview the scroller's
appearance.
Text Appearance
Click the Text Appearance button to alter the appearance of
new text added to screens. An explanation of the Text
Appearance screen is given on
page 47, Text
Appearance.
87
