MultiScree
∂
Channel
Playing a Bingo Draw
On units fitted with the optional Bingo accessory, a Bingo Draw can be
performed, complete with a summary screen of all numbers drawn. The
procedure to play a round of Bingo is similar to performing a regular random
number draw. Note that the low limit is fixed at 1, and the high limit is fixed at
90, and these cannot be changed.
[a]
During Display Mode, press
SHIFT+0
on the RNG keypad until the
Bingo!
game is selected as the current game.
[b]
Press
SHIFT+DRAW
to display the Stand By Screen.
[c]
Press
DRAW
to display the Bingo Playing Screen, ready to play a new
game.
[d]
If the Game Number is incorrect, then enter the correct Game Number on
the keypad then press either
HIGH
or
LOW
to enter it.
[e]
Now press
DRAW
to select the first random number & continue pressing
DRAW
to select additional random numbers.
[f]
If you want to review the previously selected numbers, press the
button
to traverse backwards in the list (displayed on the LCD only) or
SHIFT
+
buttons to move forwards.
[g]
When a player calls BINGO, then press the
END DRAW
button.
[h]
Then if you want to start another game of Bingo, press the
DRAW
button
and go back to step
[d]
above.
[i]
Otherwise if you want to stop playing Bingo and resume the display of the
sequence, press the
END DRAW
button again.
[j]
To resume the last played game of Bingo, press the
END DRAW
button
while in Display Mode and the Bingo Playing Screen will reappear showing
all the previously selected numbers in the last played game. Pressing
DRAW
now will continue to select numbers in that same game.
156
