141
Appendix E - Command Modem S-Register Functions
S19Not Used
S20Not Used
S21Reserved
S22Reserved
S23Reserved
S24
Sleep Mode Inactivity Timer
Unit:
Sec.
Range:
0-255
Default:
0
Description:
S24 is used to set the amount of time the modem
may be inactive before it will enter the sleep mode.
The range of S24 is 0 to 255. The Sleep Mode
Inactivity Time is automotically set to 5 seconds and
Sleep Mode is inhibited when S24 = 255.
S25
Detect DTR Change
Unit:
0.1 sec
Range:
0, 1 through 255
Default:
5
Description:
If in on-line or command mode, changes in DTR that
last less than the time specified by S25, in 0.01 second increments,
are ignored by the command modem.
S26Reserved
S27Reserved
S28Reserved
Summary of Contents for MMH900
