MultiVOIP ISDN/BRI Cabling Guide
4
Multi-Tech Systems, Inc.
Safety Recommendations for Rack Instructions (cont’d)
•
Ensure that the MultiVOIP is properly connected to earth ground via a
grounded power cord. If a power strip is used, ensure that the power strip
provides adequate grounding of the attached apparatus.
•
Ensure that the mains supply circuit is capable of handling the load of the
MultiVOIP. Refer to the power label on the equipment for load requirements.
•
Maximum ambient temperature for the MultiVOIP is 60 degrees Celsius
(140
°
F) at 20-90%s non-condensing relative humidity.
•
This equipment should only be installed by properly qualified service personnel.
•
Only connect like circuits. In other words, connect SELV (Secondary Extra
Low Voltage) circuits to SELV circuits and TN (Telecommunications
Network) circuits to TN circuits.
•
To reduce the risk of shock, all access doors should be closed during
normal operation of the equipment.
•
