MultiVOIP SS Configuration Guide: 3Com VCX PBX Systems
3
Introduction
This configuration guide includes setup information for 3COM PBX model VCX vs. 7.1, IP phone models 3102a and
3102b vs. 7.1.27.27 and Multi-Tech MultiVOIP models MVP210-SS, MVP410-SS and MVP810-SS vs. 3.08.2W.
This guide will step you through the PBX settings and MultiVOIP settings which will allow the MultiVOIP channels to
register and provide analog station(s) or analog trunk port(s).
In this example, we will have 2 channels register as analog trunks and 2 as analog stations, you may use any number or
combination of ports for your application. When the VCX is online, calls will route through the VCX to their
destination. When the VCX is offline, the VCX IP phones will register to the MultiVOIP.
IP phones and analog stations will be able to call each other and call through the analog trunks connected to PSTN lines.
This allows for 911 calls or non emergency calls to be placed if the PBX is unavailable.
MultiVOIP channel interface definitions:
FXS=analog station, connects to an analog phone, fax machine or CO/Line port on a PBX.
FXO=analog trunk, connects to PSTN line or station port on a PBX.
3COM VCX vs. 7.1 Configuration
Steps 1-12 will create users and extensions for the MultiVOIP FXS ports.
Steps 13-20 will create the identity for the MultiVOIP and FXS/FXO ports.
Steps 21-23 will create the voice mail credentials for MultiVOIP FXS ports.
1.
Connect to the VCX by entering the IP address of the PBX into your browser.
2.
Click on “Central Management Console”.
Summary of Contents for MultiVOIP MVP210-SS
Page 4: ...MultiVOIP SS Configuration Guide 3Com VCX PBX Systems 4 3 Login 4 Click on Site Name ...
Page 15: ...MultiVOIP SS Configuration Guide 3Com VCX PBX Systems 15 16 Choose new route and click Next ...
Page 18: ...MultiVOIP SS Configuration Guide 3Com VCX PBX Systems 18 19 Click on Save Changes ...
Page 19: ...MultiVOIP SS Configuration Guide 3Com VCX PBX Systems 19 ...
