Chapter 2 – Installation
Multi-Tech RouteFinder RF650VPN User Guide
32
3.
The New connection menu displays.
a.
Select Yes for Perfect Secret Fowarding.
b.
Select IKE for Secure Association.
c.
Select Secret as the Authentication method.
d.
Enter a shared Secret using alphanumeric characters, the dash (-) or the space or underline (_)
characters.
e.
Select the Local Interface and Local subnet. Local Interface should be the Public IP address
of the WAN port; Local subnet should be the private IP Network on the LAN port.
f.
Select the Remote IP and Remote subnet. The Remote IP should be the Public IP address of
the WAN port on the remote site; The Remote subnet should be the private IP network on the
LAN port of the remote site. If the remote site is an IPSec client, then select Any for Remote IP
and leave the Remote subnet blank. Click Save.
4.
The newly-created IPSec Configuration is displayed.
You may have to change the Packet filter rule if you do not have it set to Any – Any – Any – Allow.
5.
The RF650VPN is now configured as a PPTP server for VPN remote client access.
