Chapter 3 – Setting Up a Workstation and a Wireless Account
Multi-Tech Systems, Inc. RouteFinder RF825/RF825-AP User Guide (Document Number S000422B)
20
4.
The
Local Area Connection Properties
dialog box displays.
•
Select
Internet Protocol
[TCP/IP]
.
•
Click the
Properties
button.
5.
Once you click the
Properties
button, the following
screen displays (below). To have your DCHP client
obtain a dynamic IP address, click the
Obtain an IP
address automatically
button.
6.
Close out of the Control Panel.
7.
Repeat these steps for each PC on your network.
Setting a Fixed IP Address
To set a Fixed IP Address, check
Specify an IP address
instead of
Obtain an IP address automatically
.
Then click
OK
.
1.
Enter the workstation IP address as
192.168.2.x
. Note that the
x
in the address stands for numbers
101 and up.
2.
Enter the Subnet mask as 255.255.255.0
3.
Enter the Default gateway as 192.168.2.1
4.
Close out of the Control Panel.
5.
Repeat these steps for each PC on your network.
