RPR 750IS Series
9261-7912 Issue 8
15
level and this may then be adjusted by further pressing the
OCR button to increase the volume, or the MUTE button to
decrease. When the desired level is reached, release any
buttons and the pager will return to its quiescent state.
10. ALERT OPTIONS
Your pager has a number of options for alerting you to a call,
which may be selected according to the system requirements
and in some instances, individual needs.
Audible Alerts
Escalert -
a programmable option, which allows the level
of the alert beep to increase on a gradual basis. The
sequence commences with the flashing LED alert only for 4
seconds, followed by the LED + a low level alert tone for a
further 4 seconds and the sequence is completed by the final
selected alert duration (8, 16, 32 seconds, or continuous) of
LED + alert tone at full volume. The alert may be stopped at
any point in the sequence, by pressing the OCR button once.
Extended Alert
- a programmable option, this mode acts
as a reminder if an original alert is not cancelled. The
sequence will start with the LED flashing every 2 seconds,
followed by two pip tones every 120 seconds thereafter, until
cancelled by pressing the OCR button. The most recently
received message will then be displayed.
Silent Alerts
Mute Mode
- a programmable option, which will silence
the audible alerts and speech calls. Received calls will be
notified by the flashing LED and vibrate where selected.
Messages will be displayed and stored as normal, for later
recall.
Vibrate Option
- a programmable option providing a
discreet alert, which may operate in conjunction with or
separate from, the audible alert options.
