IPDA056 User Manual
Version 1.01
If you want to use Scan Key/Pistol to trigger Barcode-reading, please follow the
below steps:
a. -Select the Barcode type that corresponds to your device.
b. -Tap the input box, then press Scan Key/Pistol, the key-code will appear
automatically.
c. -Turning on the
Enable Scanner
.
After finishing the above steps, then you can use Scan Key/Pistol to trigger
barcode-scanning.
3.1.2.
RFID (Optional)
Figure 3-3 RFID
If you want to use Scan Key/Pistol to trigger RFID-reading, please follow
the below steps:
a. -Select the UHF type that corresponds to your device.
b. - Tap the input box, then press Scan Key/Pistol, the
key-code will appear automatically.
c. -Turning on the
Enable Scanner
.
After finishing the above steps, then you can use Scan Key/Pistol to trigger
RFID-reading.
a
b
