- 3 -
- 4 -
Check battery charging status at regular intervals.
When battery operating time drops below about 80%, charging time will
be increased remarkably.
If a battery is stored or otherwise unused for an extended period, be sure
to follow the storage instructions in this document. If you do not follow the
instructions, and the battery has no charge remaining when you check it,
consider it to be damaged. Do not attempt to recharge it or to use it.
Replace it with a new battery.
Store the battery at temperatures between 5 °C and 20 °C (41 °F and 68 °F).
1.3 Charger
Please use the original adapter and cable otherwise the machine will not
be charged or even be damaged.
1.4 Notes
1
.
Using the incorrect type of battery has the danger of explosion.
Please dispose of the used battery according to instructions.
2
.
The charging port of the device is a type-c interface.
3
.
The adapter shall be installed near the equipment and shall be easily
accessible.
4
.
The suitable temperature for the product and accessories
is 0-10
℃
to 50
℃
.
2.0 Installation instructions
2.1 Appearance
- Buttons instruction
IPDA084P front and side appearances are showing as follows:
Button
Function
Power Button
Press and hold to turn the device on or off
Custom Function Button Customize function by software
SCAN
Scan Button
X
Cancel Button
Num
Switch white keyboard function
Fn
Switch orange keyboard function
Setting Button
Right of the Fn Button
Enter
Enter Button