LEGAL202107V01
19
5.
Maintence
To ensure optimum module performance, München Solar recommends the following maintenance
measures:
•
Clean the module minimum once a year or more often when required depending of the pollution.
Remove all organic from the surface. Module with soiling or contamination may reduce the power
generation of the system. Always use clean water and a soft non-abrasive sponge or cloth for cleaning.
A mild, non-abrasive cleaning agent may be used to remove stubborn dirt.
•
Uncontrolled pollution is voiding the warranty or not cleaning the modules in time voids the warranty.
•
Check the electrical, grounding and mechanical connections every six months to verify that they are
clean, secure, undamaged and free of corrosion. Or else the warranty may be voided.
•
In the event of a ground fault condition, NEVER wash or spray modules with water until ground fault
has been identified, corrected by an authorized solar inverter service technician and the inverter is fully
operational. This can cause electrocution or a serious safety issue.
•
If any problem arises, consult a professional solar service provider for suggestions.
Caution: observe solar manufacturers' maintenance instructions for all components used in the system,
such as support frames, charging regulators, inverters, batteries etc.
© München Energieprodukte GmbH
Address: Stethaimerstr. 32-34, 84034 Landshut, Bayern, Deutschland
Phone: 0049 (0)871 6067 9947
E-mail: Sales@muenchenenergieprodukte.de
WWW.MUENCHEN-ENERGIEPRODUKTE.DE
