LEGAL202107V01
4
•
Under normal conditions, a photovoltaic module is likely to experience conditions that produce more
current and/or voltage than reported at standard test conditions. Accordingly, the values of Isc. and
Voc. marked on this module should be multiplied by a factor of 1.25 when determining component
voltage ratings, conductor current ratings, minimum factor of fuse sizes, and size of controls
connected to the PV output.
•
Only use same connectors to connect modules to form a string, or connect to another device.
Removing the connectors will void the warranty.
1.4.
Fire Safety
•
Consult your local authority for guidelines and requirements for building or structural fire safety.
•
Roof constructions and installations may affect the fire safety of a building; improper installation may
create hazards in the event of a fire.
•
Use components such as ground fault circuit breakers and fuses as required by local authority. Do not
use modules near equipment or in places where flammable gases may be generated. The modules
have been rated Fire Class C, and are suitable for mounting on to a Class A roof.
