How to Use
How to Use
17
How To Install
16
ADJUSTING BOLT ADJUSTER
Check again that the bolt adjusters are fully seated in the
upper and lower catch wall brackets. If so, use the wrench
to firmly tighten the nuts.
PLEASE NOTE:
The gap between the gate to the wall should be less than 2.25" (57mm).
TOOLS NEEDED:
•
Wrench
•
Hex Key
A
B
<2.25" (<57mm)
OR
<2.25" (<57mm)
2 way Lower
catch bracket
Upper catch
bracket
1 way Lower
catch bracket
A
B
OPENING YOUR GATE
Push the lever down on the upper catch bracket using your thumb, then lift the gate out.
CLOSING YOUR GATE
Swing and lift the gate back to its closed position.
PLEASE NOTE:
Always check that the gate is securely locked on the top and bottom
brackets, and never leave your child unattended.
CLEANING YOUR GATE
Use mild soap and wipe with a damp cloth. Be careful NOT to wash or wipe the stickers
on the base of the gate.
Removing or damaging the stickers will void the warranty.
Summary of Contents for Extending XL
Page 28: ......
