How To Install
How To Install
8
9
5a. For Drywall Without Stud / Plasterboard:
Drill a 7/32”(5.5mm) hole into the drywall at each
pencil mark. Insert a drywall anchor into each hole.
Use a screwdriver or drill to insert the screws through
the lower hinge wall bracket into the drywall anchors.
5b. For Drywall with Stud:
Drill a 5/64”(2mm) pilot hole into the stud at each
pencil mark (no anchor needed).
Use a screwdriver or drill to insert the screws
through the lower hinge wall bracket into the stud.
Medium
screw
Medium
screw
Drywall
anchor
7/32"
5.5mm
7/32"
5.5mm
5/64"
2.0mm
5a. Drywall
5a. Plasterboard
5b. Stud
STEP 3: INSTALL LOWER CATCH (WALL BRACKET)
1.
Place template “B” against
the wall with tape, flush to the
floor. Mark the screw holes with
a pencil to create indentation,
then remove the template.
2.
Determine whether there is a
stud behind the drywall where
you will install the lower catch wall
bracket. Proceed to either
3a
or
3b
.
3a. For Drywall Without Stud / Plasterboard:
Drill a 7/32”(5.5mm) hole into the drywall at each
pencil mark. Insert a drywall anchor into each hole.
Use a screwdriver or drill to insert the screws through
the lower catch wall bracket into the drywall anchor.
3b. For Drywall with Stud:
Drill a 5/64”(2mm) pilot hole into the stud at each
pencil mark (no anchor needed).
Use a screwdriver or drill to insert the screws through
the lower catch wall bracket into the stud.
Temp. B
(Catch Side)
3a. Drywall
3a. Plasterboard
3b. Stud
7/32"
5.5mm
7/32"
5.5mm
5/64"
2.0mm
Medium
screw
Medium
screw
Drywall
anchor
Summary of Contents for MKSA0646-REV1
Page 28: ......
