12 Screw
For fixing the safety drain tray
CAUTION
Fig.4-15
Fig.4-16
14~16 kW
Water Tray
Position A
Position B
Safety Drain Tray
1. The whole unit status show as Fig.4-15.
2. Remove the all 11
screw
from fixed Safety Drain Tray, and then take off the tray as figure showed in Fig.4-16.
3. Take off the tray along the direction of the arrow show in Fig.4-16.
4. Clean the tray and evaporator.
5. Re-install the unit follow the reverse above orders.
1. Please shut down the unit and cut off power cable before maintain the motor.
2. Don’t heavy pull the foam tray, when dismounting; otherwise the foam tray would break.
maintenance of motor
˖
0 1 2
F
3
E
4
D
5
C
6
B
7
A
89
Installation manual
7
High pressure duct
