ML180-MLT350 Dehumidifiers
8
2 Installation
190TGB-1034-A
2.3 Moving the Equipment
WARNING!
The dehumidifier is heavy and can weigh in excess of 50kg. To
avoid accidents use only approved lifting equipment.
The dehumidifier is delivered on a pallet and must be handled
carefully. All panel doors of the unit must be closed during transport.
Provided that the dehumidifier is still secured to its delivery pallet, it
can be moved using a fork-lift truck.
CAUTION!
When moving the dehumidifier always consider the possible risk of
the unit tipping over.
Figure 2-1. Example of moving the dehumidifier
Weight of the dehumidifier can be found in
2.4 Packaging and Delivery Inspection.
1. Check the delivery against the packing list, consignment note or
other delivery documentation and check that everything is included
and nothing is damaged.
2. Contact Munters immediately if delivery is not complete in order to
avoid installation delays.
3. If the unit is to be put into storage, prior to installation,
.
NOTE!
If the installation is not to be carried out immediately after the arrival of the
equipment it is advisable to leave the packing material in place on the
dehumidifier, or to re-use the packaging material to provide temporary protection
for the unit during later transport to the installation location and during
installation.
4. Remove all packing material from the unit, check carefully to make
sure that no damage has occurred during transport.
5. Any visible damage must be reported in writing to Munters prior to
the start of installation.
2.5 Storing the Equipment
The following is important if the dehumidifier is to be stored prior to
installation:
• Place the dehumidifier on a horizontal surface.
• Protect the dehumidifier from physical damage.
• Store the dehumidifier under cover and protect it from dust, frost,
rain and aggressive contaminants.
Summary of Contents for ML180
Page 2: ......
Page 34: ...ML180 MLT350 Dehumidifiers 34 7 Appendix 1 Options 190TGB 1034 A ...
Page 35: ......
