Introduction
The
MUNTS-0018 Raspberry Pi Tutorial I/O Board
is a breakout board for the
40-pin Raspberry Pi GPIO expansion bus.
It contains an on-board A/D converter, an LED, a momentary switch, two 3-pin 5V
servo headers, and 8
connectors:
●
connectors (providing four 3.3V GPIO pins).
●
output connectors (for controlling two DC motors).
●
connector.
●
Bus connector.
●
input connectors (providing four 12-bit 3.3V analog inputs).
MUNTS-0018 Raspberry Pi Tutorial I/O Board User Guide
Page 3 of 11
