You’ll also find
Advanced
settings via the three dots menu in the top-right corner of the Wi-Fi
screen. This is where you’ll find information about the current IP address, and the MAC address
of the device. If your wireless router uses WPS to set up a connection, you can enter the PIN here
too, via
WPS PIN Entry
.
It is also possible to use the
Add Network
option to connect to a hidden or undetected network.
This requires the correct
Network SSID
(the name displayed by a wireless network in other
cases) and a selection of the corresponding security types. Six options are available,
from
Open
to
WPA2 EAP
. When you’re happy, click
Save
to connect.
Note that if you connect to a large number of wireless networks when using your Amazon Fire,
you will eventually end up with a long list of them – this is maintained to make reconnection
easy. In order to tidy this up, simply tap on the entries and then choose
Forget
to remove it from
the list.
8.4 Display Settings
Minimal options are provided for adjusting the Amazon Fire display.
As mentioned above, the Brightness can be altered via the hidden Settings menu; the same
slider can be found via
Settings > Display
, alongside the important Display Sleep Mode. This
allows you to specify the delay between your last tap and the Amazon Fire screen switching off.
Many options are available, from
30 Seconds
all the way up to 1 Hour. In addition, you can also
set the Screen Timeout to
Never
— useful for watching video files!
Copyright
©
2017 MakeUseOf. All Rights Reserved
®
.