Murata GCM188R71E104KA57 Series, Reference Sheet

Caution

■ 

Limitation of use

     Please contact our sales representatives or product engineers before using our products for the applications
     listed below which require of our products for other applications than specified in this product.

　　　①

Aircraft equipment   

②

Aerospace equipment     

③

Undersea equipment   

④

Power plant control equipment

　　　⑤

Medical equipment   

⑥

Transportation equipment(vehicles,trains,ships,etc.)    

⑦

Traffic signal equipment

　　　⑧

Disaster prevention / crime prevention equipment      

⑨

Data-processing equipment

　　　⑩

Application of similar complexity and/or requirements to the applications listed in the above

■

 Fail-safe

    Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may
    be caused by the abnormal function or the failure of our product.

■

 Storage and  Operation condition

1. The performance of chip monolithic ceramic capacitors may be affected by the storage conditions.

 1-1. Store capacitors in the following conditions: Temperature of +5

℃

 to +40

℃

 and a Relative Humidity

        of 20% to 70%.

  (1) Sunlight, dust, rapid temperature changes, corrosive gas atmosphere or high temperature and humidity 
        conditions during storage may affect the solderability and the packaging performance.
        Please use product within six months of receipt. 

  (2) Please confirm solderability before using after six months. 
        Store the capacitors without opening the original bag.
        Even if the storage period is short, do not exceed the specified atmospheric conditions.

 1-2. Corrosive gas can react with the termination (external) electrodes or lead wires of capacitors, and result
         in poor solderability. Do not store the capacitors in an atmosphere consisting of corrosive gas (e.g.,  
         hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas etc.).

 1-3. Due to moisture condensation caused by rapid humidity changes, or the photochemical change caused 
        by direct sunlight on the terminal electrodes and/or the resin/epoxy coatings, the solderability and 
        electrical performance may deteriorate. Do not store capacitors under direct sunlight or in high huimidity 
        conditions

!

JEMCGC-2702N

11