Setting the IP Address, Subnet mask
and Gateway Address
To use the OfficeBridge Online on the Web browser such as “Microsoft Internet Explorer” (4.0 or later) or
“Netscape Communicator” (4.5 or Later), you must do the following procedure to enter the correct IP address and
subnet mask in advance. If you need any help, contact your network administrator.
Note:
Dynamic Host Configuration Protocol (DHCP) is not supported.
1
Press
Program, G, 1, 0, 2.
2
Press
ENTER.
3
Enter the IP address using the numeric keypad.
Note:
To enter numbers less than 2 digits between the dots, use the cursor key to move the entry point.
To correct a wrong number entry, move the cursor with the cursor key and overwrite it.
4
Press
ENTER
.
5
Enter the subnet mask address using the numeric keypad.
Note:
To enter numbers less than 2 digits between the dots, use the cursor key to move the entry point.
To correct a wrong number entry, move the cursor with the cursor key and overwrite it.
6
Press
ENTER
.
7
Enter the Gateway IP Address if necessary. If you do not wish to set the Gateway IP address, do not enter
any characters.
Note:
To clear the number, press
CANCEL
.
8
Press
ENTER
.
9
To reflect the settings, turn the power off and then on according to the following order.
9-1. Turn the fax unit off.
9-2. Unplug the DC cable from the OfficeBridge box.
9-3. Plug the DC cable to the OfficeBridge box.
9-4. Turn the fax unit on.
Turn Off/On
To Active
Gateway IP Address
. . .
Set Subnet Mask
. . .
Set IP Address
. . .
Network Settings
02 TCP/IP Setting
17
Summary of Contents for MFX-1300
