Muratec MFX-1500 Operating Instructions Manual Download

Page: 16 / 149

Getting started

1.7

12.

BROADCAST

— Helps you set up the process of a fax broadcast (sending the

same document to more than one location).

13.

Numeric keypad — Just like the numeric keys on a regular tone-dialling
phone. In addition to dialling phone and fax numbers, they also enter numbers
when you’re making certain settings.

14.

START

— Begins a manual fax transmission, manual reception or copying.

15.

CLEAR ALL

— Resets copying settings to their defaults.

16.

STOP

— An all-purpose STOP key. Stops the current operation, ejects a

document from the automatic document feeder and cancels alarms.

17.

SPEED DIAL

TEL INDEX

— Starts a speed-dialling operation, which you finish

by pushing three of the keys on the numeric keypad. Also displays one-touch
and speed dial entries sorted alphanumerically, as in a telephone directory.

18.

BOOK DOC SIZE

— Sets the fax for either A4-, B4-, A5R- or B5R-sized

documents when you use the flatbed scanner.

19.

MEMORY TRANSMIT

— Selects which transmission mode your fax uses,

whether from memory or from the document feeder. If the light next to this
key is glowing, your fax will scan documents into memory before trying to
send them. Otherwise, your fax will transmit straight from the feeder, which is
slower and also prevents others in your office from using the fax until your
communication is absolutely complete. (When you use the flatbed scanner, the
machine always uses memory transmission).

20.

CANCEL

— Press this key to delete characters on the

LCD

and cancel

commands you have entered into the machine.

21.

In Fax mode:

REDIAL

PAUSE

— Redials the last number you dialled. In certain operations, it

also produces a special pause character which can be useful during the dialling
of long-distance numbers.
Or, in Copy mode:

PAPER SIZE

? — Selects the printout paper you want to use.

22.

ENTER

— Much as

STOP

is a “Whoa!” key,

ENTER

is a “Go!” key.

It confirms user settings, begins operations and moves through
command levels.

23.

In Fax mode:

DIALLING OPTIONS

— Press this to insert special symbols into telephone

numbers (see page 2.7).
Or, in Copy mode:

SORT COPY

— Press this key to toggle the sorting of printed copies.

24.

In Fax mode:

PROGRAM

— Scrolls (moves) through features and command options as

displayed on the

LCD

Or, in Copy mode:
Press to increase the reduction or enlargement rate at 1% intervals.

25.

In Fax mode:

FLASH

— Lets you quickly disconnect a call and go right to the next one

without having to hang up the handset.
Or, in Copy mode:

ENLARGE

% — Press this key to choose one of several fixed copy

enlargement rates. (See page 1.37 for more information.)

26.

In Fax mode:

— Scrolls (moves) through features and command options as displayed on

the

LCD

In Fax mode, while scanning a document:

NEXT

— Press to tell your machine to scan one or more additional documents

after the current scanning ends.
In Copy mode:
Press to decrease the reduction or enlargement rate at 1% interval.

27.

In Fax mode:
Blue key — Press to access the other telephone networks such as Cable &
Wireless (Mercury).
Or, in Copy mode:

REDUCT

% — Press this key to choose one of several pre-set copy reduction

rates. (See page 1.37 for more information.)

28.

RESOLUTION

—

In Fax mode:
Press to toggle among the three resolution modes and 64-level greyscale.
In Copy mode:
Press to select either superfine or 128-level greyscale mode.

29.

CONTRAST

— Press to enter the contrast setting mode. To change the contrast

level, press

keys.

30.

COPY

FAX

— Press this key to toggle between Fax mode or Copy mode.