4-11
Network Interface
4.5 Changing the default settings
The default settings offer the most common scan settings, please try using
these settings prior to adjustment.
Item
Available setting
Default setting
Document type
Text, Photo&Text, Photo
Text
Resolution
200, 300, 600 dpi
200 dpi
Contrast
Lightest, Light, Normal, Dark,
Darkest
Normal
Auto reset time
Auto reset timer: 1 to 10 minutes
Reset after scan: On, Off
3 minutes
Off
Scan parameters
Set the default setting for document type, resolution, contrast and scan size.
1
Press [Menu], [2], [4], [1], [Enter]. The machine prompts you to select the
default document type setting.
Doc. Type:Text
/
/Enter
2
Use [ ] or [ ] to select the setting.
3
Press [Enter]. The machine prompts you to select the default resolution
setting.
Resolution :200dpi
/
/Enter
4
Use [ ] or [ ] to select the setting.
5
Press [Enter]. The machine prompts you to select the default contrast
setting.
Contrast :Normal
/
/Enter
6
Use [ ] or [ ] to select the setting.
7
Press [Enter] to save the settings.
To return to standby mode, press [Reset].
Summary of Contents for MFX-1930
