Muratec MFX-2550 Guide User Manual Download

Page: 209 / 327

4-62 Useful Reception Functions

Select [AM] or [PM] and enter the end time, and press [Enter].

Enter the time in the 12 hour format.

•

You can use [

•



], [



], [



], [



], and the numeric keys.

Press [Enter].

Press [Auto Print].

Select [ON], and press [Enter].

If you select [OFF], the Auto Print setting is disabled.

Press [Enter].

To continue to register distributing conditions, and repeat the procedure from steps 4 to 33.

•

It is necessary to set auto distribution to enable it.

•

(See page 4-65.)

Summary of Contents for MFX-2550 Guide








































































































































































































































































































































Search results

Summary of Contents for MFX-2550 Guide

Reviews:

Related manuals for MFX-2550 Guide

Brands by name

Popular brands

Muratec MFX-2550 Guide, User Manual

Search results

Summary of Contents for MFX-2550 Guide

Reviews:

Related manuals for MFX-2550 Guide

Brands by name

Popular brands