Muratec MFX-2550 Guide User Manual Download

Page: 254 / 327

1
2
3
4
5

Communication Management

Managing the Communication History 6-5

Managing the Communication History

You can print a journal report that records the communication history of fax, Internet

Fax, and scanner jobs to check the communication history.

Printing a Journal Report

You can manually print the journal report or set the machine to automatically print the

report according to the settings you register in advance.

When manually printing a report, the transmission history for the past 100 jobs is

printed.

When automatically printing a report, you can set to print the report when there is

transmission history for 100 jobs, or set to print the transmission history every day at a

set time (daily communication report).

Note

Daily communication reports print the communication history for the previous day

•

(12:00 am to 11:59 pm) at a specified time on the next day.

When a daily communication report is set, the report is printed at the specified time

•

if the number of jobs that have not been printed is 1,000 or less. When the number

of jobs exceeds 1,000, printing is performed once for the first 1,000 jobs, and the rest

are printed at the specified time. When the number of jobs exceeds 1,000, if the daily

communication report for the previous day has not yet been printed (because it has

not yet reached the specified time), the daily communication report is also printed

when the number of jobs reaches 1,000.

Types of Journal Reports

The following types of journal reports are printed by the machine. When manually

printing a report, you can select the type of journal report to print. When a daily

communication report is set, you can set which type of journal report to print. Each report

manages 100 communication jobs.

Fax Transmit Journal (fax transmission history)

•

Fax Receive Journal (fax reception history)

•

Fax Communication Journal (fax transmission and reception history)

•

Mail Transmit Journal (Internet Fax and Scan to E-Mail transmission history)

•

Mail Receive Journal (Internet Fax reception history)

•

Mail Communication Journal (Internet Fax and Scan to E-Mail transmission and

•

reception history)

Folder Transmit Journal (Scan to Folder transmission history)

•

FTP Transmit Journal (Scan to FTP transmission history)

•

Note

The transmission history of jobs older than the last 100 jobs cannot be printed.

•

If the power of the machine is turned OFF for an extended period of time (more

•

than 72 hours when the backup battery is charged more than 24 hours), the

communication history is erased. For automatic printing without a time specified

and manual printing, the history for the latest 100 jobs is always retained.

Summary of Contents for MFX-2550 Guide








































































































































































































































































































































Search results

Summary of Contents for MFX-2550 Guide

Reviews:

Related manuals for MFX-2550 Guide

Brands by name

Popular brands

Muratec MFX-2550 Guide, User Manual

Search results

Summary of Contents for MFX-2550 Guide

Reviews:

Related manuals for MFX-2550 Guide

Brands by name

Popular brands