Muratec MFX-2550 Guide User Manual Download

Page: 88 / 327

1
2

Basic F

ax Functions

Initial Setup (User Install) 3-3

Time zone

A time zone is a region that adopts the same time differences as the ones from the

Royal Observatory, Greenwich, England (within ± 12 hours), usually regarded as

standard time around the world.

(See page 3-15.)

Caller ID

Set this mode to ON to display the caller number (Caller ID) on the display while

the machine is beeing called. This is an optional service provided by your telephone

company.

(See page 3-17.)

These settings can be changed at any time.

Note

You can also register or edit “User Install” using a web browser.

•

For details, refer to

Chapter 3, “Specifying Device Settings” in the OfficeBridge Guide.
Print out the “Settings List” to insure that your settings are correct.

•

For the

procedure for printing, refer to Chapter 1, “Checking the Machine Information” in

the Administrator’s Guide.

Registering the User Install

Setting the Language

Select the language on display. The selected language will be applied to the list printouts

as well.

Press <Setting>.

Press [Management].

If an administrator password is set, enter the password and press [Enter].

Summary of Contents for MFX-2550 Guide








































































































































































































































































































































Search results

Summary of Contents for MFX-2550 Guide

Reviews:

Related manuals for MFX-2550 Guide

Brands by name

Popular brands

Muratec MFX-2550 Guide, User Manual

Search results

Summary of Contents for MFX-2550 Guide

Reviews:

Related manuals for MFX-2550 Guide

Brands by name

Popular brands