Murphy HelmView HV750, Installation Manual

Section 78 

00-02-0803

03-07-12

 - 

1 -

Hardware Installation 

The following instructions will guide you through installing the HelmView 750 display. 

Inspecting Package Contents 

Before attempting to install the product, we recommend you account for all parts and inspect 
each item for damage (which sometimes occurs during shipping). The items included in the 
box are: 

HV750 or HVS750 unit 

Installation kit – P/N 78-00-0638 includes: 



  4 ea. machine screws and flat washers 



  4 Nylock nuts 



  Installation manual – P/N 00-02-0803 



 Operations 

Manual – P/N 00-02-0805 

Dash-Mounted Installation 

Tools needed.  



  Drill with 5/32” size bit 



 Jig 

Saw 



  Wrench or socket 6-32 Nylock nuts (provided) to studs 

Preparing the Dash 

Determine the location of the HelmView in the dash. Use the Installation Template (included at 
the end of the manual) as a guideline to cut a hole in the dash to the specified dimensions. Drill 
holes where indicated on the template for the mounting screws. 

NOTE

:  When using the paper template from the manual, if you downloaded this 

document from the FW Murphy website, be aware that the pdf file may not 
automatically print to scale. When submitting the file for print, you will need to 
select “None” for Page Scaling. Check the accuracy of the printed template by 
verifying the measurements labeled on the template are correct.