Section 78
00-02-0599
07-19-07 -
1 -
Product Information
The PowerView
™
display is designed for instrumentation on electronically controlled engines
communicating using the SAE J1939 Controller Area Network (CAN), NMEA 2000 (GPS
features) or a proprietary blend of protocols. The PowerView display is a multifunction tool that
enables operators to view many different engine, equipment, or transmission parameters and
service codes, and can support many devices simultaneously.
Two mounting options are provided for the display. The in-dash mounting option requires a
hole to be cut for insertion of the display. A plastic installation template P/N 78000386 is
included in the box and a drawing is also provided in the back of this document.
The gimbal-mount method enables the display to be installed on a flat surface. Its design
allows you to rotate and tilt the unit for the best display position for the operator’s viewing.
NOTE:
Please read the PV1000 Operations Manual for detailed instruction on
the use and operation of the display.
Inspecting Package Contents
Before attempting to install the product, it is recommended that you ensure all parts are
accounted for and inspect each item for damage (which sometimes occurs during shipping).
The items included in the box are:
•
PV1000
unit
•
front cover snap on – P/N 78-05-0302
•
installation kit – P/N 78-00-0386 includes:
•
8 mounting screws and nuts
•
extra SD card cover
•
back plate (can be used as mounting template)
•
Installation
manual
•
Operations
manual
PHASE
OUT
/ DISCONTINUED
Check
Availability
