43
ENGLISH
To go to the menus, press .
Use and to change menu and to enter it..
Press to go back.
Remark: When a menu is idle for some 30 seconds, the system
automatically goes back to the previous screen and so on,
until the main screen.
4.1. Automatic setting menu :
The system adjusts automatically the air flow and temperature requested
depending on either the regional weather forecast, if you have a connected
device, or autonomously, if you do not have the connected option. The system
can thus use hot or cold air in the best and most efficient way possible.
The air flow displayed is called the basic air flow.
The temperature displayed is the setpoint temperature.
To change the values, go to “Change” and press
Depending on the configuration of your installation, the programme will recommend an air flow and temperature (You are
not required to take them into account).
Set the values wit and . Confirm with .
Settings:
Basic air flow: 10 to 100%
Setpoint temperature: 5 to 18°C
4. MENUS
Menu reached by pressing or when on main screen:
Screen
Contrast
Brightness
Basic settings
Choose a temporary forced flow rate.
Press BACK to cancel.
Choose duration in hours for a floaw
rate of X %
Back to original settings ?
!!! REPLACE FLOW RATE AND
TEMPERATURE SETTINGS !!!
Cancel
Confirm
Screen :
Screen :
CTA4-Mode-d-emploi(A5)-2021 2/02/21 18:04 Page 45
