background image

Appendix

User manual 9000-41011-0200000_hdb_en_20

 91 / 92

amended, or copied, and transferred to the customer's users as part of the 

customer's own technical documentation on paper or on electronic media. In 

this case, the customers shall bear sole responsibility for the correctness of 

the contents of the technical documentation produced by them.
If the technical documentation is integrated in part, or in full in the customer's 

technical documentation, the customer shall refer to the copyright of Murrelek-

tronik GmbH. All safety instructions must be included.
Although the customer is obliged to make reference to the copyright of Mur-

relektronik GmbH, provided the technical documentation of Murrelektronik 

GmbH is used, the customers shall market and/or use the technical documen-

tation on their sole responsibility. The reason is that we have no influence on 

changes or applications of the technical documentation and even minor 

changes to the initial product or deviations in the intended applications may 

render incorrect the specifications contained in the technical documentation. 

For this reason, the customer is obliged to label the technical documentation 

provided by Murrelektronik GmbH if and the extent to which the documenta-

tion is amended by the customer. The customers shall undertake to exempt 

Murrelektronik from claims for damages of third parties if the latter are attrib-

utable to any defects in the documentation. This shall not apply to damage to 

the rights of third parties caused deliberately or by gross negligence.
The customers shall be entitled to use the company brands of Murrelektronik 

GmbH exclusively for their product advertising, but only inasmuch as the prod-

ucts of Murrelektronik GmbH are integrated into the products marketed by the 

customers. When using Murrelektronik GmbH brands, the customers shall so 

state in an adequate manner.

Summary of Contents for Mico Pro fix 1.10





























































































Reviews: