ASSEMBLY
12
F–040700C
HOW TO INSTALL THE SEAT
Use the fasteners shown below to install the
seat
. The fasteners are
shown at full size.
(A)
1001054
(B)
17x47
1. Carefully remove the plastic bag from the
seat.
2. Align the holes in the
seat hinge
to the holes in the
seat
(Figure 4). Fasten the
seat
to the
seat hinge
with the fasteners
as shown.
3. Check the operating position of the
seat.
If the
seat
needs to
be adjusted, loosen the two
wing bolts
. Slide the
seat
forward
or backward along the
seat adjusting holes
as shown. Tighten
the
wing bolts (A).
Figure 4
Seat
Seat
Adjusting Hole
Seat Hinge
A
B
HOW TO ASSEMBLE THE STEERING WHEEL
Fasteners are not required to assemble the steering wheel. Attach
the steering wheel as follows:
1. Make sure the front wheels point forward.
2. Place the
bellows
in position on the
console
. (Figure 5)
3. Slide the
steering wheel
and
steering post
thru the
bellows
and
console
. Make sure the end of the steering post aligns with
the pinion gear. Push on the
steering wheel
. The
steering
post
will lock onto the pinion gear.
Pull on the
steering wheel
. Make sure that the
steering post
is locked in place.
Console
Figure 5
Bellows
Steering Wheel
Steering Post
Cover
Figure 6
Hub
Steering Post
Pinion Gear
