background image

3

12. Damage Requiring Service

Stop using the unit immediately and have it inspected by an authorized music hall
service center whenever:

1. The power supply cord or plug has been damaged.

2. Liquid has been spilled into the unit.

3. The unit has been exposed to rain.

4. The unit does not operate properly.

5. The unit has been dropped or damaged.

6. Smoke or any unusual smell is detected from the unit.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

Getting Started

Thank you for purchasing the music hall ph25.2. The ph25.2 is a tube headphone
amplifier designed for the music lover. We chose a select group of technologically
advanced components to create this sophisticated headphone amplifier.

Please read this manual carefully. In addition to installation and operating
instructions, it provides valuable information that will help you get optimum
performance from your system. Please contact your authorized music hall dealer
for answers to your questions. In addition, all of us at music hall welcome your
questions and comments.

Save the shipping carton and all enclosed packing

material for future use. Shipping or moving the unit in anything other than the
original packing material may result in severe damage that is not covered by the
warranty. Be sure to keep the original sales receipt. It is your best record of the
date of purchase, which you will need in the event warranty service is required.

A Few Precautions

Placement

Use common sense when placing the ph25.2. Always place it on a firm, level
surface. Make sure that the shelf or cabinet can support the weight. Ensure that
there is adequate ventilation around all sides of the unit.

Avoid placing the

ph25.2 where it may be subject to excessive heat, such as near a heat register.
Do not place anything on top of it.

For best performance, avoid placing the

ph25.2 where it may be subject to vibration, such as near a speaker.

Summary of Contents for PH25.2









Reviews: