5
Using the ph25.2
on/off
volume
1
2
ph
25.2 headphone amplifier
input
cd
aux
headphones
headphones 1-2
Plug your headphones into socket 1 or 2. Both sockets can be used at the same
time.
power - on/off
Push the button on the front of the ph25.2 to turn the unit
. When the ph25.2
is
; a blue light will appear on the front panel.
on
on
input
Select the input you'd like to listen to; CD or AUX.
volume
Controls volume for both headphone outputs and the Pre Output.
Troubleshooting
If no sound comes out of the ph25.2 headphone outputs, check your headphone
connection by unplugging and replugging. Turn the volume control up. If you're
still not getting any sound, check that your source component is properly
connected to one of the ph25.2 inputs and that you've selected the correct input
on the front panel.
If no power, check that the power cord is properly inserted on back of the ph25.2
and that it is plugged into a live socket.
If you're using the ph25.2 in a tape loop and you're getting no output. Check that
you've connected it properly and that the volume control is up on the ph25.2.