SPECIFICATIONS
M3 CD manual issue 1
Page 16 of
17
Output
Output impedance
50 ohms
Output, digital 0dB level
RCA output - 2.2V r.m.s. nominal
DAC
DAC circuit
24 bit Delta-Sigma (bit stream) dual differential 8x over-sampling
Total correlated jitter
<135 picoseconds peak to peak
Linearity
<0.1dB down to -96dB
Frequency response
10Hz to 20 kHz -0.2dB max.
Channel separation
>105dB 20 Hz to 20 kHz
Signal-to-noise ratio
>117dB “a”- wtd.
Total harmonic distortion
<0.003% 10Hz to 20 kHz
Connections
Line level outputs
1 pair line level RCA connectors, left and right outputs
Digital outputs
1 RCA coaxial connector SPDIF
1 TOSLINK optical connector
Power requirement
Mains voltages
115/230VAC 50/60Hz (factory pre-set)
100VAC 50/60Hz (alternative)
Consumption
20 Watts maximum
Weight
Unit only, unboxed
6.65 kg (14
⅔
lbs)
In shipping carton
10.5 kg (23 lbs)
Dimensions
Wide
440 mm (17
⅓
”)
High, including feet
100 mm (4”)
Deep (front to back) including terminals 375 mm (14¾”)
Standard accessories
IEC type mains lead (10-Amp type)
M3 remote control
Batteries, LR03 or AAA, manganese alkaline type - 2 off
Musical Fidelity reserves the right to make improvements which may result in
specification or feature changes without notice.
