background image

X-RAY

  Instructions For Use. Page 10

the current track (4 mins 29 sec for this
example) as below:

Pushing the TIME button again changes

the display to show the remaining time for the
whole disc (58 mins 12 secs below):

A third press of the TIME button will

now bring the display back to the first (elapsed
track time display) and so on.

REPEAT PLAYBACK

The REPEAT button allows the repeated

playback of either 1 track or all tracks on the
disc.

By pressing the REPEAT button once,

you can repeat the entire disc (or the pro-
grammed selections - see later) over and over
again. The legend REPEAT appears on the
display at the same time as shown below.

If you press the REPEAT button twice,

just the current track is repeated. The leg-
ends REPEAT and 1 appear on the display
as below.

In this example, track 2 will be repeat-

edly played.

CONTINUOUS PLAY

Continuous play provides you with the

option of playing just a certain section of the
disc over and over again.

You can use the display to help you find

the desired section or you can set it by ear.
When you reach the desired starting point,

SPECIAL FEATURES

press button A/B. The display will show the
flashing symbol A-

Once the disc has reached the end of

the desired section, press the A-B button
again. The letters A-B will now be illumi-
nated in the display.

Now the selection you have chosen will

be repeated until the continuous play is
switched off by pressing button A-B again
or by pressing buttons STOP, INTRO or
SHUFFLE.

SHUFFLE  PLAYBACK

If SHUFFLE is pressed the tracks on

the discs are not played in consecutive or-
der but in random order. The individual
tracks will also be played in a different or-
der each time the disc is played. The word
SHUFFLE appears on the display to pro-
vide a visual reminder that the SHUFFLE
function has been activated.

If the next track button >>| is pressed

whilst in SHUFFLE mode the X-RAY will
randomly select a new track to play from
those available on the disc which it has not
already played. Press the SHUFFLE but-
ton again to switch off the shuffle random
playback function.

Summary of Contents for X-RAY















Reviews: