5
7.
Insert 4 wood dowels (a) into the 4 holes in the tops of the left and right side
panels (B) and (C). Insert 2 wood dowels (a) into the 2 holes in the top of the
upper facing panel (F).
8.
Locate top (G). We recommend that you use 2 people at this stage of your
mantel assembly to prevent any damage from happening to either the top (G)
or the front of your already build assembly. Line up the top (G) so that the 6
wood dowels (a) in your built assembly line up with the 6 holes in the top (G).
Once lined up press top (G) onto the built assembly until flush. Once flush
insert and tighten 2 bolts (b) through 2 washers (c) through the 2 holes in the
2 blocks of the right side assembly and the 2 holes in top (G). Repeat for the
left side assembly. You will see 2 blocks on the inside front of the upper facing
panel (F). Insert and tighten 2 bolts (b) through 2 washers (c) into the holes in
the blocks and the holes in the top (G). Do not over tighten and strip bolt (b).
9.
INSTALLING THE FIREBOX
Take your electric firebox out of its packaging and position it between the 2 legs of
the mantel. Once you are close to the wall, plug the firebox into the nearest outlet.
The firebox comes with 3 metal brackets and 11 black screws (10 required plus 1
spare). These metal brackets must be attached to all 3 sides of the firebox and 2
sides of the mantel to ensure that your firebox does not move around as you use it.
All 3 trims attach to the firebox by inserting and tightening 2 screws. Both the left
and right side trim attach to the mantel front by inserting and tightening 2 screws
The top trim does not attach to the mantel, just the firebox. If you have any questions
about the firebox please reference the installation instructions that come with the
firebox.
Hardware Used
b Bolt
x 6
c
Washer
x 6
18PCS
A
1PC
2PCS
20PCS
A
B
C
EE
C
B
#8*1"
Ø8*30
100*20*20
20PCS
DD
2PCS
2PCS
1PC
2PCS
G
H
I
JJ
I
H
G
#8*1-3/8"
2PCS
FF
#8*5/8"
18PCS
A
1PC
2PCS
20PCS
A
B
C
EE
C
B
#8*1"
Ø8*30
100*20*20
20PCS
DD
2PCS
2PCS
1PC
2PCS
G
H
I
JJ
I
H
G
#8*1-3/8"
2PCS
FF
#8*5/8"
Hardware Used
a Wood Dowel
x 6
18PCS
A
1PC
2PCS
20PCS
A
B
C
EE
C
B
#8*1"
Ø8*30
100*20*20
20PCS
D D
2PCS
2PCS
1PC
2PCS
G
H
I
JJ
I
H
G
#8*1-3/8"
2PCS
FF
#8*5/8"
B
E
F
C
A
B
E
F
G
C
A
