Operating instruction: H002 / 0938 / 0940
Edition: 01/2016
Subject to alterations.
15
4.5
Connection points for the compressed air
The pressing power does not depend on the width of the inserted belt. The required pressing power
should not be exceed or below this value.
The Press is carefully to be closed.
Fill presses equipped with pressure hose only with cleaned and dry compressed air.
Fill pressure hose only, when the press is firmly closed and the hose is properly fitting.
Fill the pressure hose only by means of filling devices provided for this purpose; this makes also pos-
sible the later emptying.
Air pressure – pressure hose:
max. 7 bar
Air pressure – hold-down bars:
max. 4 bar
The function in-feed of compressed air is not controlled automatically and must be done from a sta-
tionary compressed air network or a compressor system. The maximum press inlet pressure is not
displayed or monitored on the heating press.
Caution
Risk of injury! Connect the pressure hoses carefully!
Check that compressed air connections work and do not leak.
Pressure hose
Hold-down bar
Hold-down bar
