6
MUSTANG SURVIVAL
/ OWNER'S MANUAL –
DLX 38 INFLATABLE PFD
COMPONENT INSPECTION INSTRUCTIONS
1. Examine the service indicator through the window panel
(Fig. 1 and 2). Ensure the service indicator is green. If the service
indicator is red, the mechanism has been fired or is incorrectly
fitted (see Re-arming Your PFD (for your model)).
NOTE: THE SERVICE INDICATOR MUST BE GREEN BEFORE PROCEEDING.
2. Undo the Velcro™ strips along both sides of the PFD (Fig. 1 and 2).
3. Ensure the oral-inflation dust cap is in the stowed position
(Fig. 12).
4. Ensure the service indicator is green and the pull-tab lanyard is
hanging on the outside; secure the Velcro™ strips on both sides of
the Inflatable PFD.
5. For MD2953 only - Ensure the bobbin is valid. The PFD, or bobbin,
must have been purchased within the last three (3) years. If the
purchase date is unknown, check the date printed on the bobbin
and replace if older than three (3) years (see "Re-arming Your
Automatic PFD (MD2953)" on p. 14).
READINESS CHECKLIST
Check your Inflatable PFD and ensure all of the checkpoints listed
below are true before use.
Service indicator is green (Fig. 1 and Fig. 2).
No rips, tears or holes; all seams are securely sewn; and the
fabric, straps and hardware are still strong.
All Velcro™ are securely fastened.
Inflatable PFD is not twisted.
Oral-inflation dust cap is in the stowed position (Fig. 12).
For the MD2953 only - Ensure the bobbin is valid. The PFD, or
bobbin, must have been purchased within the last three (3)
years. If the purchase date is unknown, check the date printed
on the bobbin and replace if older than three (3) years
(see Re-arming Your PFD (MD2953), p. 14).
Your Inflatable PFD is ready for use if all applicable boxes are
checked.
NOTE: CONTACT YOUR MUSTANG SURVIVAL DEALER IF YOU HAVE ANY CONCERNS
ABOUT THE READINESS OF YOUR INFLATABLE PFD.
