INSTALLATION AND ASSEMBLY:
PLASMA SCREEN ADJUSTABLE WALL MOUNT
Features:
• Fits 42"-60" flat panels
• Articulating swivel double-arm mount
• VESA 400x400 compatible
Models: MV-ARM4
This product should only be installed by a qualified professional.
Make sure that the supporting surface will safely support the combined load of
the equipment and all attached hardware and components.
Never exceed the maximum load capacity of 200 lbs (90 kg).
Never mount this product to metal studs.
If mounting to wood wall studs, make sure that mounting screws are anchored
into the center of the studs. Use of an "edge to edge" stud finder is highly
recommended.
Always use an assistant or mechanical lifting equipment to safely lift and
position equipment.
Tighten screws and nuts firmly, but do not over tighten. Over tightening can
damage the items, greatly reducing their holding power.
WARNING STATEMENTS
NOTE: Read entire instruction sheet before you begin installation and assembly
2
27
• Reduces clutter with integrated cable
management
• Folds to 8” from the wall
• Maximum Load Capacity: 200 lbs (90kg)
8
Assurez-vous que les câbles soient détendus suffisamment pour permettre le mouvement
du bras porteur.
Dirigez la rallonge à travers un côté du support et le(s) câble(s) de signe de vidéo à l'autre
côté pour éviter le brouillage avec le signal.
FIG. 8.2
COUVERTURE
DE CABLE
FIG. 8.1
FIG. 8.3
